Get the most suitable shower enclosure doors

A shower enclosure door is a passage that supports the enclosure in making it more user-friendly in combination with the shower tray. We are not concerned with shower trays here, because if they are not on a tray or directly to the floor, all can be possible. There are approximately 5 different doors that form all or part of the enclosure with some variants. You have two or three basic shapes of a shower floor plan. There is another form of shower enclosure, which has no door and called a walk-in shower enclosure.

Shower cubicles come in many styles-silver framed, white-framed, glass, frame-less, semi-frameless. we do not touch on these stylistic questions here, but when you choose a shower enclosure that has to do with its place and function in your bathrooms, you always want to start with several questions. Each of the different shapes, sizes, and styles of enclosures. 

Size of the shower enclosure

They must also understand it that, without the sliding or pivot door, you will need to open the door outside. Hence, the volume of the shower enclosure doors will depend on your size and type. You must know how big your shower enclosure can be under the space in your bathroom.

The shape of the shower enclosure

The shower enclosure has four basic shapes. The fundamental forms are rectangular and square, which are self-explained. The third basic shape is the quadrant, which fits into an angle with two straight sides and an arch from a circle that connects the two. I know quadrants as an offset if one side is longer than the other. The fourth basic form is the pentagon. They are like the fourth, but in the middle of the door, there are two small panels at the angle instead of a curved front. Once a basic form may appear different in all edges, in those cases a corner enclosure, where the quadrant is the curved edge provides more space for a showering area.

Types of Shower Door

For any shower enclosure doors, take extra note of the access required for opening the door and holding the way to the limit, some shower doors only extend as far as 30 cm on small enclosures, so check it. 

• Hinged: These doors are connected to a wall or another panel in the door, which normally opens outside, and needs as much room as possible for complete opening
• Pivot: Also known as moving doors. The frame and/or floor or tray are installed at a top and bottom along the diameter of the arch. This means that part of the door opens in the room and a smaller portion turns into the enclosure.
• Bi-Fold: These double doors for the shower fold in the centre and slide open on bars.
• Slider doors: a slider shower door is one open on a frame, with one door with a single slider and two double sliders opening in opposite directions.
• Corner Entry: Two slider doors are normally one on either side of a corner.

Installing a Shower Door or Enclosure

To install a shower enclosure door or a bolt in a tiled shower, it is important to use a high-speed drill with a suitable smack but, without cracking or chipping, to drill the tile through. This is the most critical aspect of the construction since tiles are hard to replace and may be difficult to replicate if they are older than ten years. Please take care to make the right decision. 

When the door hinges squeeze, apply a silicone caulk into the passage so that the bolts get smooth. The same strategy applies to door hooks with flush-mount–applying silicone sealant offers extra protection from drainage and eventually moulding and unpleasant odours.

For any help, there are many bathroom stores that have professional teams to assist the customers. Note down your available space and budget to get the guidance and get your problem sorted. Good day!